Home

Manufacturers List

ACR Products

www.acrelectronics.com

Products List

All Distress Signals

Contacts

Satellite3 406 Emergency Position Indicating Radio Beacon High efficiency electronics * Audio/Visual indicators of active transmission * Automatic activation when out of bracket and in water Marine tough design for years of useful service * Non-Hazmat battery * Made in the U.S.A. * Lead free In an emergency, your registered, digitally-coded distress message is broadcast via a powerful 6 watt, 406 MHz signal, typically within 1 hour. An integrated 121.5 MHz homing signal then guides local Search and Rescue efforts.

Part Number: 2874

Class 2 lithium battery * Replacement due 6 years from date of manufacture or 5 years after beacon is placed into service, whichever is first, or after emergency use Constructed of high impact UV resistant polymer material Hydrostatic release (auto) deployment Out of bracket and wet or manually activation Waterproof to 33' @ 10 min. 6.3 watt (406.037 MHz) output 48 hours @ -4° operational life...Typical is 72 hours @ -4° (longer in higher ambient temperature) Cospas-Sarsat, USCG, FCC, IC, MED approved * Meets GMDSS, RTCM and IMO standards Optional GPS Interface Cable, this connects the Satelite3 406 to your vessel's GPS receiver to continuously update and store precise position data. GPS positioning provides SAR notification typically within 2 - 15 minutes. (sold separately) It is mandatroy that you register your EPIRB. In the U.S. go to: www.beaconregistration.noaa.gov to register Sea Safety is a factory authorized service center for ACR products.

HydroFix hydrostatic release unit for Category I EPIRB. A patented rod system does not rely on a battery, blade or pyrotechnic device to release the beacon. This advantage allows for a quick, seamless and reliable release in an emergency. This is a date stamped porduct and must be replaced every 2 years from the date of installation or 4 years from date of manufacture. Part Number: 9490